Home > Foam Rollers > Foam Roller - Black - 16" Long x 4" O.D. x 1-1/2" - 2" I.D.
Foam Roller - Black - 16" Long x 4" O.D. x 1-1/2" - 2" I.D.
Foam rollers are black and made of closed-cell foam rubber and will not absorb fluids. Installs over 1.5" x 1.5" square tubing. With some vigorous effort and plenty of lube, it will install over 1-3/4" x 1-3/4" square tubing. This foam roller will not install over anything larger than 1-3/4" x 1-3/4" square tubing without likely damage.
Nominal Dimensions: - 16" Long x 4" O.D. x 1-1/2" - 2" I.D. We give a range of I.D. sizes because the inside diameter will vary due to the manufacturing process being an inexact science. For the same reason, the outside diameter (O.D.) and length may vary somewhat as well. We call it "nominal" because that means: "in name only". The actual size of the foam rollers are never exact in every dimension. However, the foam material is spongy and therefore it will stretch to conform to a round bar or pipe up to 1/2" larger than the actual inside diameter size, or a square tube up to 1-3/4" x 1-3/4" as mentioned above.
If stretching is required, it is highly recommended that a generous amount rubbing alcohol (isopropyl alcohol) be used as a lubricant to assist the installation process. The alcohol will quickly evaporate once the foam roller is in place in its permanent location. You can't use too much alcohol as it won't harm finishes or the foam rollers. It always fully evaporates without leaving a residue. We do not recommend lubricants such as WD-40 or similar as it won't evaporate and will leave a greasy residue.
While the actual foam rollers you receive will vary somewhat from nominal dimensions, we do our best to match up the foam rollers in your order so that visually they appear to be the same dimensions.